Level switch

Rf admittance level switch

capacitive
To prevent the hanging
More reliable and accurate
Wide range of application
Product description: Rf capacitor switch is a kind of high intelligent material level measurement product, which overcomes the inconvenience brought to customers by the low alarm precision and complex adjustment steps of
INQUIRY

I. Product introduction

Rst73- rf admittance level switch is the replacement product of capacitive level switch, which solves the problem of material adhesion and has higher system stability compared with other similar products. It can work reliably even under extremely harsh field conditions and is not affected by changes in hanging materials, temperature, pressure, material density, humidity, or even chemical properties of materials.

II. Product features

1. Strong versatility: widely used in the detection of various materials, fly ash, particles, powder, liquid, viscous, conductive, non-conductive materials can be; It can meet the measurement requirements of different temperatures and pressures, with the highest temperature up to 800℃ and the highest pressure up to 5MPA. Can be used in corrosion, impact and other bad places.

2. Anti-adhesion: With unique circuit design and sensor structure, the material on the probe can be ignored by the measurement and automatically corrected, so that regular cleaning is not necessary and false measurement and false signal can be avoided. (Anti-hanging material)

3. Maintenance-free: there are no moving parts in the measuring process, no mechanical parts are damaged, and maintenance is not required.

4. Powerful functions: large output contact capacity, and status indicator light to show the work, 0, 30 seconds delay can eliminate the impact of material fluctuations.

5. Anti-interference: contact measurement with strong anti-interference ability can overcome the influence of steam, foam, stirring and measurement.

6. Power off protection: normally on or normally off (field switching).

7. Accurate and reliable: the measurement is diversified, making the measurement more accurate, the measurement is not affected by environmental changes, with high stability and strong service life.

III. Technical parameters

1. Relay capacity: SPDT. Rated 10A, 115VAC, or 5A, 220VAC

2. Delay time: 0~30 "s continuously adjustable

3. Power source: 220VAC or 24VDC

4. Sensitivity: 0.5pF

5. Material temperature: -184℃ to 800℃

6. Circuit temperature resistance: -40℃ to 80℃

7. Power loss protection: high and low mode, adjustable on site

8. Outer shell: IP65, heavy cast aluminum shell

IV、?Selection guide

Model	RST73-
	Connection
	F	Flange connection
	S	Threaded connection
	C	Clamp connection
		Power
		A	220VAC
		B	24VDC
			Length
				Temperature
				N	150℃
				T	400℃
				S	Customized